Forum Post: RE: getting started with Sitara AM3395 ICE
Matthias,I'm afraid an independent example as such is not available. You might find more info on Starterware - http://processors.wiki.ti.com/index.php/StarterWare_02.00.01.01_User_Guide#McSPI , but...
View ArticleForum Post: RE: MessageQ and IPC problems
Hi Ronny,I talked to one of the Ipc 3.x developers about this, and here is what we think could be happening in your case. On the Linux side, you call MessageQ_alloc() and MessageQ_put(). The call to...
View ArticleForum Post: RE: CCSv4 project changes to migrate to CCSv6
Hi Janet[quote user="janet"]For the PACKAGE_NOT_FOUND error, you don't have the Ipc package in your path. You would add this in your project properties, under General->RTSC, as in your screen shot....
View ArticleForum Post: RMAN_Init Failing
Hello, I am trying to modify C6678 H264 HP Encoder by creating a periodic clock encode function using Clock_Create call.The original implementation was having a Task_Create call which creates the...
View ArticleForum Post: USB MSC Class(Host & Device)
Dear Team, We are looking to emulate the MSC Device(Pen drive), which are connected to USB1(HOST)of AM335x GP EVM.The EVM is connected to the PC by USB0(DEVICE).The end objective is to emulate...
View ArticleForum Post: USB CDC-ECM Class Driver for Starter ware
Dear Team, We are looking to work on AM335x and i would like to know the feasibility for Ethernet over USB in Both Device and Host modes in bare metal.1.Is there any up grades in the...
View ArticleForum Post: Introduction to the am335x PRU, and how to program it in C on LINUX
Hi,I published a 2 parts article related to the am335x PRU. The firstis an introduction:http://www.embeddedrelated.com/showarticle/586.phpFollowing the first part, I received feedbacks from people...
View ArticleForum Post: RE: MEM_alloc()
HI,I am using dvsdk4_03, Devkit8500(DM3730), codec engine_2_26, Ubuntu 1004, I copy the codec-engine example as my project.Q1:How can I allocated a memory on my codec-engine's codec side? I want to use...
View ArticleForum Post: RE: DSP Link Chip Select
Hello Brad! No this is issue is not yet resolved. I have verified that 0x0200 0000 is the correct address. Not only by being able to modify it but also through dmesg ( the address which the kernel...
View ArticleForum Post: RE: AM335x SK and WEC2013: Persistent storage and KITL problem
I have loaded a 4GB SD card with the MLO, EBOOTSD.nb0 and NK.bin that comes with the Demo package "WEC7 BBB 01.05.00", Also I have formatted the card with Fat32 and 4096 byte sectors (using hp foarmat...
View ArticleForum Post: RE: WinCE 7 Prebuild image for AM335x EVM Board
I have loaded a 4GB SD card with the MLO, EBOOTSD.nb0 and NK.bin that comes with the Demo package "WEC7 BBB 01.05.00", Also I have formatted the card with Fat32 and 4096 byte sectors (using hp foarmat...
View ArticleForum Post: RE: AM335X WinCE7 Suspend and Resume
I have loaded a 4GB SD card with the MLO, EBOOTSD.nb0 and NK.bin that comes with the Demo package "WEC7 BBB 01.05.00", Also I have formatted the card with Fat32 and 4096 byte sectors (using hp foarmat...
View ArticleForum Post: RE: AM3352 WEC7 boot from NAND flash too slow with...
I have loaded a 4GB SD card with the MLO, EBOOTSD.nb0 and NK.bin that comes with the Demo package "WEC7 BBB 01.05.00", Also I have formatted the card with Fat32 and 4096 byte sectors (using hp foarmat...
View ArticleForum Post: RE: WEC7 Boot time with AM3517
I have loaded a 4GB SD card with the MLO, EBOOTSD.nb0 and NK.bin that comes with the Demo package "WEC7 BBB 01.05.00", Also I have formatted the card with Fat32 and 4096 byte sectors (using hp foarmat...
View ArticleForum Post: RE: AM3358
I have loaded a 4GB SD card with the MLO, EBOOTSD.nb0 and NK.bin that comes with the Demo package "WEC7 BBB 01.05.00", Also I have formatted the card with Fat32 and 4096 byte sectors (using hp foarmat...
View ArticleForum Post: RE: AM335x typical boot time and nk.bin size
My board isn't a Beaglebone Black but it does use ebootsd.nb0Whilst its booting its sending messages to my PC saying what its doing, offering a menu etc These messages come from the com port on my dev...
View ArticleForum Post: RE: DSP/Bios+28335
Hammad,Yes, you can build the “Kernel Examples” for the eZdsp board from the Resource Explorer in CCS v5.5. These are generic examples, which don’t use any peripherals directly, so you won’t see...
View ArticleForum Post: RE: MessageQ and IPC problems
Hi Ronny,Yes, TransportShm uses shared memory, and this is the transport used by MessageQ. So if you use the .cfg files posted earlier, you should be ok.Best regards, Janet
View ArticleForum Post: RE: Why I can't put the Physical Address from ARM to DSP
Hi Steven,Yes, could you please try that?Best regards, Janet
View ArticleForum Post: RE: Where can I find the API reference guide for TI-RTOS?
Hammad,Your question seems to be in way related to the forum post that you responded to, so I have split it into a separate thread.I would recommend that you start with the SYS/BIOS Wiki page to get...
View Article