Forum Post: Building Android ICS for beagleboardXM
Hi All,I'm trying to build TI-Android-ICS-4.0.3_AM37x_3.0.0 for beagleboardXM. However, I am facing this issue "make[1]: *** [kernel/bounds.s] Error 1" when trying to build the kernelClean...
View ArticleForum Post: RE: TI-RTOS RAM CONCERTO
thanks,it's a bit complicate respect what I've imaged
View ArticleForum Post: RE: minicom: cannot open ttyUSB0: No such file or directory
Hi Joe,Please check whether the following link helps you.http://processors.wiki.ti.com/index.php/How_to_Build_a_Ubuntu_Linux_host_under_VirtualBoxMoreover, this query seems to be a common open query on...
View ArticleClik here to view.
Forum Post: RE: SYS/BIOS large data allocation
Hi Ashish!Everything is at the right place: .bss section is placed "on the high side" of ram space, and thus the binary size is correct.In the project I've attached the binary file to wich I refer is...
View ArticleForum Post: configure linux kernel for RGMII
Helloon a custom board AM3352 i use a PHY marvell 80E1118 and a PHY marvell 80E3018 both in RGMII mode :I validated Network device support ->PHY device support ->Drivers for marvell PHYin linux...
View ArticleForum Post: RE: Running a script on startup on Arago
Hi Hugo,Here is some info on Debian based systems runlevels and init scripts:https://www.debian-administration.org/articles/28https://wiki.debian.org/RunLevelHere are the steps you need to follow:1....
View ArticleForum Post: RE: Taking sound beyond 'mcaspPlayBk'
MarkThere are no StarterWare examples for audio other than the demos supplied with the StarterWare relase. Paul M.
View ArticleForum Post: RE: testing usb otg gadget (mass storage) as built in kernel module
I think you have to be careful to make the distinction between g_file_storage and g_mass_storage. I believe g_file_storage has been deprecated in favor of the newer g_mass_storage. Kernel command...
View ArticleForum Post: DSP/BIOS tsk schedule work bad!
Today,I met a question when program with DSP/BIOS, sometimes my program only OS system and HWI can work well,TSK can not be schedule and when to check the kenerl infos witch CCS3.3 plugin All...
View ArticleForum Post: RE: BIOS_start unexpected reset
Hi Cedric,Unfortunately, the MSP430FR5739 device is not supported by SYS/BIOS. It is likely you are seeing the device reset because the initialization is not being done properly. Please see the...
View ArticleForum Post: RE: how to use nand flash memory?
Hi,If you want to save the data at run time use the simple files. All the user data can be easily saved to nand using FileSystem support. If you are looking to save some data at some predefined...
View ArticleForum Post: RE: minicom: cannot open ttyUSB0: No such file or directory
Hi Rajasekaran,Thank you for remembering me. Yes, it does connect a host also on other vBox works, therefore, the connection is not a issue.Joe
View ArticleForum Post: RE: Error while using MMC2 for wlan in Am335x evm based board
I'm my case, the configurations are the same as those used in the EVM board. The only difference are the pins I use.Our custom board uses the following pinmux configuration:static struct pinmux_config...
View ArticleForum Post: RE: CCSv6 unable to create a custom RTSC platform
Hello SashaThank you for your reply. The requirement to restart CCS after setting the environment variable is definitely correct although this was not the cause of the my problem since the error...
View ArticleClik here to view.
Forum Post: RE: Missing .out file when debugging example project
Thank you for the response, I just retried using the "TI Target" (as opposed to GNU Target) hello example based upon information in the linked thread and I recieve a different error: (I'm pretty sure I...
View ArticleForum Post: RE: DSP/BIOS legacy API libs missing in SYS/BIOS 6.40
Hi Ralf,For compatibility with SYS/BIOS 6.34 and older the source is provided so the customer can rebuild it. However, we encourage SYS/BIOS users to transition to full SYS/BIOS APIs.Thanks,--Emmanuel
View ArticleForum Post: RE: Cache warning
David,there is a bug in xdctools 3.30.01 that prevents you from loading and editing your platform. Here is the thread with more info and a...
View ArticleForum Post: RE: OMAPL-138: Missing EDMA HWI
Hi Vincent,Thank you very much for the quick response, so far the machines running DSP_TSK_MODE *and* the BCACHE calls have been meeting our interrupt latency requirements. However, having experienced...
View ArticleForum Post: RE: Clear CPU caches for reading system timer on beaglebone
Hi Irina, Can you please tell me what products you are using to develop (CCS, SYS/BIOS, Industrial SDK, XDCtools, IPC, UIA)?Thanks,-- Emmanuel
View ArticleForum Post: RE: What causes syslink sample error on the OMAPL138-LCDK?
I find that uboot should also be built. According to link: http://processors.wiki.ti.com/index.php/Building_PSP_Components_for_OMAP-L1x_on_v3.x_Kernel#Rebuilding_U-BootI set PATH variable to:export...
View Article