Quantcast
Channel: Embedded Software (Read Only)
Viewing all articles
Browse latest Browse all 25965

Forum Post: RE: Boot android on beaglebone black from SD card

$
0
0

Hi Mahendra, I had same problem.

Is your HDMI output to TV working with TI Android 4.2.2 image? I was using micro-HDMI(male)-HDMI(female) converter from Adafruit. It was showing up on the screen but along with all green lines.  

Then I ordered the (4DCAPE-43T) and it did boot (checked using serial debug) but no display.

Finally got an idea from this post (http://e2e.ti.com/support/embedded/android/f/509/t/292535.aspx?pi199489=2) about changing the EEPROM address on the cape. I have connected the jumpers as shown below. And then it started working - touch and display both.

Good luck!


Viewing all articles
Browse latest Browse all 25965

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>