Forum Post: How to deal with this situation for convert yuv444 to...
Hi,all:I want to call jpeg codec v02.02.02 on 6678.I see the datasheet of jpeg that Arbitrary image size supported.By the way,My image format is YUV444.And for some reason,I must select yuv420p as the...
View ArticleClik here to view.
Forum Post: SYS/BIOS build successfull but error log reports some errors...
Hi all,I am a newbie at using the SYS/BIOS kernel and I am learning about using it using the TI wiki pages.I linked the required TivaWare files for my Tiva C launchpad and wrote a program to blink an...
View ArticleForum Post: AM335X_StarterWare_02_00_01_01 neonVFPBenchmark not generating...
When running the neonVFPBenchmark example from AM335X_StarterWare_02_00_01_01 on a AM335x starter kit, using CCS 5.5 and TI ARM compiler v5.0.7, initially got the following benchmarks:[quote]****...
View ArticleForum Post: TI RTOS cannot set HSE for High Speed UART
TM4C1290NCPDTTI-RTOS forces HSE bit to zero in UART_CTRL (UART Control register). It suppose to set HSE bit for higher baud rate like 3Mbps and...
View ArticleForum Post: RE: OMAPES=3.x support in SGX PVR DDK 1.10
Any good news about the release? The last news about SGX530 rev121 and Jelly Bean rowboat was 2 years ago. Thank you
View ArticleForum Post: bootloader from 64Mbyte SD card.
Hi,I want to run the "bootloader"of AM335x Starterware from 64Mbyte SD card.RBL works fine! MLO is copied correctly by RBL.The MLO then copies application image (app) from the SD card. And then, it...
View ArticleForum Post: RE: Memory regions are always disable for all TI devices with...
did you set any boot parameter explicitly for the same?
View ArticleForum Post: AM335X WinCE7 Suspend and Resume
Hi,I am using "BSP_WINCE_ARM_A8_02_30_00" version BSP for AM3354 processor based board. As per the release notes and wiki links, suspend and resume functionality is working by disabling the DMA...
View ArticleForum Post: RE: C66x H264 HP 4-core decoder questions
Hi Andrey,We could able to replicate the issue at our end, however the project files attached in the setup are giving compilation errors(This project was created for a device-variant that is not...
View ArticleForum Post: Getting Started with C2000 LaunchPad TMS320F28027 using Debian...
Hi,I am trying to build a new project for C2000 launchpad TMS320F28027 without success so far.. I'm working with Debian Wheezy OS and ccstudio.During the installation it showed no errors but it just...
View ArticleForum Post: RE: Change Audio Sample Rate BBB ALsa
ok thanks, i'll try itI'm watching the BIT_CLOCk signal with the Oscilloscope and the frequency remains fixed at the 48Khz . It shows the data coded with 16 bits and the sample rate above. For my...
View ArticleForum Post: AM17xx - Linux tree: SDK vs latest Linux tree from Arago?
Team,Could you please clarify the below for AM17xx?a) Could you please point me to:- the latest AM17xx PSP that we offcially released?- the latest linux arago tree tag compatible with AM170x and...
View ArticleForum Post: RE: TI-RTOS PROJECT CAN NOT BE BUILT
Dear Moses,Is there any update about the issue ?Regards,Doruk
View ArticleForum Post: RE: Something wrong with Interaction between SYS/BIOS and interrupts
Moses,Thank you,Please run me through that configuration. Is this configuration required for SYS/BIOS also to start?Aaron
View ArticleForum Post: McASP_Clock Failure Check without AHCLKR
Hi,I am working on porting parts of the McASP example to BeagleBoneBlack using McASP0 instead of McASP1.Looking at the description of the Receive Clock Failure Check I noticed that the external AHCLKR...
View ArticleForum Post: RE: DSP/BIOS heap on C6713
Karl:Here are my CCS5.5 settings:Compiler Summary of Flags-mv6700 --abi=coffabi -O3 --symdebug:skeletal --optimize_with_debug=on --include_path="C:/ccs5/ccsv5/tools/compiler/c6000_7.4.6/include"...
View ArticleForum Post: RE: DSP Firmware exit function(s) when stopped by firmware_loader
Robert,I am working with ezsdk-5_05_01_04/ and syslink_2_20_00_14, I think I should have Ipc_detach on this version. From your reply, I should use Notify API on both sides, does this Notify module...
View ArticleForum Post: RE: Our MLO doesn't work as same as Starterware MLO
Hi,Thank you for the answer.I do mean working on a customised board. We have DDR3 and 512M nand Flash on it. I've tried both the binary and the 3 files in the link, none of them works yet... The...
View ArticleForum Post: RE: Troubles building the samples for DK-TM4C129X : gmake : error 3
hi nirav,sorry for the last reply: i had a win-bash installed in my search path.after replacing (removing) it with a standard shell (like the one in c:\ti\ccs5_5_0\bios_5_42_01_09\xdctools\bin\sh.exe)...
View Article