Forum Post: RE: cmem c6run omap138 LCDK
Hi Evan,Are you using custom board or OMAPL138 LCDK board ?Currently we don't have SDK release for OMAPL138 but you can get kernel 3.11 from kernel.org, it would work.If boot or any issues, you can...
View ArticleForum Post: RE: ti dsplink examples with linux 3.1.10
Hi,After successful loading the DSP Link 1.65.01.06[dsplinkk.ko] on Linux kernel 3.13 version on omap3530 processor based board, we ran the following example/opt/gpp/BIN/Linux/OMAP3530/DEBUG/messagegpp...
View ArticleForum Post: RE: BIOS timer error
Hi Eric I meet the same problem as you. I can't load my program on core4~7 but it's OK on core0~3. And how to know which device is the project build for, C6678 or C6674? I can not find any...
View ArticleForum Post: RE: Numonyx SPI NOR chip support in kernel 3.12
Hi Ankur,I think, You have to change/add Ids (sector size etc.,) in driver file located at "drivers/mtd/devices/m25p80.c"for the new SPI NOR chip.static const struct spi_device_id m25p_ids[] = {
View ArticleClik here to view.
Forum Post: RE: static created timer not available
Hi all I'm sorry for upload two same picture. The following picture showed the .out file is loaded at Core2.
View ArticleForum Post: RE: DSP Link 1.65.01.06[dsplinkk.ko] on Linux kernel 3.13
HiHi,Here is more information , continuation to above threadWhile Execution/run time:when running ls command , we have seen INFO: task kjournald:845 blocked for more than 120 seconds.From the source...
View ArticleForum Post: DSP Link 1.65.01.06[dsplinkk.ko] on Linux kernel 3.13
Hi,After successful loading the DSP Link 1.65.01.06[dsplinkk.ko] on Linux kernel 3.13 version on omap3530 processor based board, we ran the following example/opt/gpp/BIN/Linux/OMAP3530/DEBUG/messagegpp...
View ArticleForum Post: RE: Cannot ./configure in EZSDK of beaglebone black
Hi,Better to use linux host machine for cross compilation of xenomai.http://comments.gmane.org/gmane.linux.real-time.xenomai.users/10342
View ArticleForum Post: RE: AER FDNLP corrupted output
Hi JianzhongYes we still experience this problem.Two files of the send path output are attached, one with the FD NLP enabled and one with it disabled (TD NLP).Both files process the same audio: 0-3s is...
View ArticleForum Post: RE: suggest the suitable MSP family microncontroller
Sunil,you may want to reach out to your local FAE.
View ArticleForum Post: RE: DM368 IPNC - Crashes when changing bitrate in dual-stream
Hi Chris,Here are our encoder settings, apart from size & bitrate everything else is default from the IPNC code. Use case is dual-stream H.264 1080p30 + H.264 D1@30fps, hopefully this printout...
View ArticleClik here to view.
Forum Post: DM8127 H264 main profile not working
Hi All,I am trying to set H264 in main profile, with below codec settings:maxBitRate = -1;encodingPreset = 3rateControlPreset = IVIDEO_USER_DEFINED;enableHighSpeed = 0;format = 8profile =...
View ArticleForum Post: RE: Creating RTSC project
Gopal,those are very open-ended questions. Are you planning to use SYS/BIOS (TI-RTOS)? You can start here: http://processors.wiki.ti.com/index.php/Category:SYSBIOS and here:...
View ArticleForum Post: RE: Memory Initialization
[quote user="Karl Wechsler"]how to disable this auto-0-initialization.[/quote]Use the linker option --zero_init=off. Before you do that, carefully read the warnings in the section titled Zero...
View ArticleForum Post: RE: linux c6x expectations - evm 6678 like target
Hi, Ian,Linux-c6x does not support MMU and when kernel boots up, it will need to load as much as what might be used later to the memory. You may want to use the max memory to find out how much actually...
View ArticleForum Post: cpuidle - SW & HW
Hello,I'm trying to find the relation between the cpuidle in Linux to the HW behaviour.For example, let's assume there is a single process which only does as following:while(1){ //do something...
View ArticleForum Post: RE: Java runtime for omap l138
Hi Titus:Trying to run a simple GUI I get "cannot open shared object file ' error and following your link I manged to solve the first three error one by one but the error continued for "libXst.so.6"...
View ArticleForum Post: RE: Supported SysLink and Linux kernel versions for...
Gran,I'm sorry, but I cannot find the RT patch for Linux mentioned above. It might have been removed. It's been a while.~Ramsey
View ArticleForum Post: RE: MessageQ and hardware interrupts
I suggest you use CCS / RTSC Object Viewer (ROV) to inspect the Hwi module. It will show you all the interrupts that are currently in use. Look in the Tools menu.~Ramsey
View ArticleForum Post: DM365 hang sending H.264 over ethernet
Using Linux kernel 2.6.37 DVSDK 4_02_00_06H.264 encoder version 02.30.00.06The problem is that after a few minutes of sending H.264 encoded video over ethernet, the Linux kernel will hang and nothing...
View Article