Forum Post: RE: Error During Debugging of TI-RTOS Application code
Dear Moses Thank you very much for your answer. If it is not a runtime error then i should not probably worry about it. I also saw the link .. thanks for your help man. RegardsHammad
View ArticleForum Post: RE: linux-c6x: sgmii problem on c6678
Rex,Thanks for your reply!I downloaded from the link in linux-c6x.org/git. the latest edition which has supported two ports of SGMII.But when I set the net with command “# ifconfig etho 192.168.1.101...
View ArticleForum Post: RE: matrix-gui-e can not start
Sir,Where to run the depmod command.And where should the path you mentioned should be changed and how to change the same.Thank you
View ArticleForum Post: RE: NIMUDeviceTable problem
Thank you very much for answer.Is the drivers for BIOS 6.x ? If I'll rebuild NDK 2.24 for DM648 will I have suitable drivers ?Regards
View ArticleForum Post: RE: DM385 CSI2 Pin Mux setting.
Hi Kim,were you able to use the CSI2 interface to capture video?Im dealing with exactly the same issue, I found that not all CSI2 registers where being set to the correct value by checking the CSI2...
View ArticleForum Post: RE: Log_info form Float number format
Hi Janet,I'm failing to build your code. Getting the following error:generating interfaces for package configPkg (because package/package.xdc.inc is older than package.xdc) ... configuring...
View ArticleForum Post: RE: PWM output with BeagleBone Black / set duty cycle
hi qxc. i am getting nothing from my pwm output pin. i realize you are driving at 100kHz.i am trying to drive a rc-servo (50 Hz, 50% duty cycle).please confirm a few parameters that you are...
View ArticleForum Post: RE: LLIAddStaticEntry usage
It appears to be working properly if I remove the calls to llEnter / llExit from inside the LLIAddStaticEntry() function.When I call those functions I get an error reported in the console...
View ArticleForum Post: RE: VoLIB TGE: sample rate setting has no effect
Ashok,There is no planning for the next VoLIB package, at least in a short term.Regards, Eric
View ArticleForum Post: RE: E_spOutOfBounds errors
Hi Feng, The error points to one of your task stacks. You can open ROV and select the Task module to see all the tasks running on that core. In the Detailed view of the Task module, look for the...
View ArticleForum Post: RE: HeapMem Assertion Failure
[quote user="Marko Moberg"]However, for some reason it causes our malloc routines to fail but that is probably another story which I need to debug next[/quote]Forgot to answer this part...Keep in mind...
View ArticleForum Post: RE: NDK transmitting fragmeneted UDP
Lech, This is a known bug that's been tracked in our system. The work-around can be found in this postLet me know if you have other questions.Thanks,Moses
View ArticleForum Post: RE: TI-RTOS and TCP/IP runtime change configuration
[quote user="Marco Crivellari"]- to change the static IP at boot time in order to override the default IP from XGCONF you need "Stack begin" hook [/quote]Yes. The stack begin hook will modify the...
View ArticleForum Post: RE: System_printf() missing messages
Dong, Either you need to call System_flush() to output the contents of SysMin to the console or wait till your application exits. Try calling System_flush() after your System_printf() to see the...
View ArticleForum Post: RE: Problem with UART interrupt
Dave, Glad that you have your question answered! Good luck with your project.Regards,Moses
View ArticleForum Post: RE: Ti RTOS interrupt latency inconsistent 28335
Josue, Just to be certain about how you're measuring the latency. The TI-RTOS kernel has a benchmark project that we use to measure the interrupt latency. This is a more trusted way of measuring it....
View ArticleForum Post: RE: CCS could not find .cfg file
You are correct. I do have cygwin installed in my machine.If I want to remove it, how do I do that? I did not see it in the...
View ArticleForum Post: RE: CCS v5, boot.s28 source window misaligned during step,...
Hi Jim, To get started, what version of SYS/BIOS and CCS are you using?Thanks,Moses
View ArticleForum Post: RE: F28377D: unable to move SYS/BIOS target from FLASH to RAM
Hi Sandeep, What linker errors are you getting now?Thanks,Moses
View ArticleForum Post: Does AM437x SDK 07_01_00_00 support RTC-only mode for LPDDR2
Hi,Does AM437x SDK07_01_00_00 support RTC-only mode for LPDDR2?If yes, has anyone verify this?If not, do we the expected schedule as to when it will be ready?ThanksJoseph
View Article
