Forum Post: RE: SysBios Am335x cache
[quote user="henlee"]1. Where are Am335x cache parameters bufferable, cacheable, and shareable documented? I don't see anything in Am335x TRM about the MMU.[/quote]The parameters can be found in the...
View ArticleForum Post: RE: TI RTOS on c64x+
Thanks Emmanuel.I need further information. Does it support Cortex A9 on L138 Or Cortex A8 on DM8168? Also there are some video trainings available for TI rtos kernel. But i am not finding any such...
View ArticleForum Post: RE: Ipc_attach failure
We are using IPC to sync all cores, and SR0 is defined in cfg. In deed, we are going to use it with Name Server and barriers. If we turn Ipc_start off, then Name Server will not perform the right...
View ArticleForum Post: RE: How to set time_scale and fixed_fream_rate_flag?
Hi Ammon,time_scale changes with targetFrameRate and not with targetBitrate.Please change targetFrameRate and check the time_scale. fixed_frame_rate_flag is 1 for VBR and 0 for CBR.
View ArticleForum Post: RE: Arago build failure on da850-omapl138-evm
Hi Terry,Yes please.Try to re-setup the environment of your host PC and update me.[quote]Connecting to www.angstrom-distribution.org|140.211.169.177|:80... connected.HTTP request sent, awaiting...
View ArticleForum Post: RE: Does IPC 3.x support C6657?
J-breeze,I did not say the wiki pages incorrect, the information about the migration can find at this wiki. I did not get any doc other than this wiki for migration, so that I shared this wiki only....
View ArticleForum Post: RE: GateMutex memory allocation on the C66x
Mohsen,I do not have the detailed information for this. I hope, Someone can help for gateMutex query.
View ArticleForum Post: RE: Discrepancy in StarterWare implementation and AM335x ARM...
Hi,No ideas from TI side?Regards,Patrick
View ArticleForum Post: Delay after MDIOInit() in StarterWare CPSW
Hi,In the StarterWare CPSW Wiki (http://processors.wiki.ti.com/index.php/StarterWare_CPSW) it is written, that enough delay shall be given to ensure the successful completion of the MDIO module...
View ArticleForum Post: RE: enetLwip_sysbios does not build: httpd.c and lwiplib.c missing
Perhaps I should mention that there are some suspicious build variables (project properties->build->variables):BuildArtifactFileBaseName...
View ArticleForum Post: How can I import a shmIpcBenchmark example into CCSv6?
Hi Champs,I'm trying to import a shmIpcBenchmark example in PDK C6657 v1.1.2.6 into CCSv6.I could import it with SYS/BIOS v6.37.04.32 and XDCTools v3.25.06.96. But I got build error messages below...
View ArticleForum Post: RE: DM365 h264enc_02_00_00_09 H264 create error?
Perfect helped me too -I needed to add this to my config file after adding 'frame_closedloop_flag = 1' flag to my H264DEC algorithm parameters, since I was getting the error: Algorithm_create>...
View ArticleForum Post: Excellent Outlook OST PST Conversion Application
PDS OST PST conversion tool is most trustable tool that enables to repair corrupt Outlook OST file and save OST data as PST with entire existing database. OST to PST software easily extract OST to PST...
View ArticleForum Post: RE: AM335x i2c probe fails when multiple devices are added
Thank you for sharing your solution with the community.Best regards,Miroslav
View ArticleForum Post: RE: manual install of TI-RTOS missing example code
Hi,TI-RTOS doesn't support 6678 yet, use SYSBIOS instead: http://www.ti.com/tool/sysbiosAnother way of getting SYSBIOS is installing the MCSDK: http://www.ti.com/tool/bioslinuxmcsdkWhen you install the...
View ArticleForum Post: RE: how to make the image that is burned to c6678's nand flash
Hi,[quote]c6678's on board nand flash. I can't find any documents on how to build this[/quote]Are you discussing about c6x-linux (DSP linux) ?
View ArticleForum Post: RE: GPIO as SPI Chip Select
Hi Ali,What processor are you using ?Please refer to the following TI E2E thread for SPI configuring.http://e2e.ti.com/support/embedded/linux/f/354/p/356928/1254237.aspx
View ArticleForum Post: RE: AM335X gpio inotify
Hi Tomer,Could you please create a new thread for your requirement/problem.Old threads may get less attention than new one.
View ArticleForum Post: RE: TI RTOS on c64x+
Hi Emmanuel,Additional Note: I am looking for help on TI RTOS on DM8168 and OMAP L138 both ARM and DSP side only. It would be great if you could provide the above information at earliest.
View ArticleForum Post: RE: Helloworld on arago
Hi Miroslav,I went thru that training yesterday. That helped. Thank you. It at the same time also made me wonder about a few other things. Specifically packages that can be removed. In the...
View Article