Forum Post: RE: Running TI-RTOS on IAR Embedded Workbench (6.10.3)
Todd,when I had that problem with XDCTOOLS_JAVA_HOME, I opened a Windows command window and there I set XDCTOOLS_JAVA_HOME. After that, I started IAR from the command line in the same command window...
View ArticleForum Post: RE: BCACHE_wbInvAll() is asynchronous
Hi, so let me try to understand you a bit:Your DMA() is for receiving an incoming data buffer since you "Do Stuff with DMA data"?If that is the case, are you sure its safe to do "wbInvAll"? Because if...
View ArticleForum Post: RE: IPC_start fails with Nameserver issue
Robert,This is turning out to be a sticky problem (I saw your post to the other thread asking William if he had found a solution).I guess we need to dig down into the dirty details...You say you have...
View ArticleForum Post: RE: Using SPI for MSP430
Robert,This example is from the MSP430F5529CFG file changes:var hwi1Params = new Hwi.Params();hwi1Params.instance.name = "dmaISR";Program.global.dmaISR = Hwi.create(50, "&MSP_EXP430F5529LP_isrDMA",...
View ArticleForum Post: RE: No prints from kernel running on DRA608(AM335x) board
Hi All,1. If I use SDK6.0 generate uImage, run as bootm uImage on my custom board, kernel boots and I get prints.2. If I use SDK7.0 generate uImage/zImage and run as bootm uImage - dtb or bootz zImage...
View ArticleForum Post: GPIO Interrupt Problem when Debuging with BeagleboneBlack
Hello;I have built a simple program using the gpioLEDBlink and gpioCardDetect StarterWare examples. I want to test the GPIO Interrupts. My idea consists of switching on a LED when a GPIO port detects...
View ArticleForum Post: RE: serial port read /write access
Hi,You should change the permissions somewhere in init.am335xevm.rc.For me, I set this permission as follows under the section of init.am335xevm.rc "on property:dev.bootcomplete=1"chmod 0777 /dev/ttyO0...
View ArticleForum Post: RE: MSP430F5529 Launchpad Evaluation Kit, CCstudio Assembly...
To All Interested Readers: I found the book that is relevant for assembly language programming using the MSP430 product line. This book is what you will need to get started. I am...
View ArticleForum Post: RE: Desktop-linux-sdk ELF segments download
Anish,Can you elaborate more for the observation? This is seen from download experiment or read through code. I think ELF format parser is a standard tool, do you see problems here?Regards, Eric
View ArticleForum Post: RE: RAM configuration of OMAP-L138 for ARM and DSP...
Hi, I am sorry that it takes so long to reply.On ARM side, I run a customized Angstrom Distribution on ARM side, which has an Linux 3.3 kernel. On DSP side, I run BIOS 6.35.04.50. I am looking forward...
View ArticleForum Post: psp EDMA SPI transactions by the EDMA GPIO event
I need to start EDMA SPI receive 16 bytes for each GPIO event.I know how to do it as baremetal (without SYS/BIOS) application. In the bare metal: I initialize EDMA for receive GPIO event. After EACH...
View ArticleForum Post: RE: Qt and Tslib
Hi Faith,[quote]Though, the same Qt (that comes in the SDK toolchain) works fine for the am335x starter kit touchscreen. It causes an issue with out touchscreen device.[/quote]Could you please...
View ArticleForum Post: RE: Redirect SPL and u-boot log to mtd partition
Hi Ankur,I think you would need NAND file system support for this kind of operation and this isn't available in the earliest stages of the booting process.As you have network access on your board, you...
View ArticleForum Post: RE: Intro to the TI_RTOS Kernel Workshop
I can second this. I am sitting in the TI-RTOS workshop right now with Eric & Brad and it's really quite good to get a quick grounding in TI-RTOS and its usage. If you can't take the workshop...
View ArticleForum Post: 3.8 Kernel
Where can I find the Arago 3.8 kernel source. I am trying to run it on the Keystone II since the default images that come with the MCSDK are 3.8 kernel
View ArticleForum Post: RE: DM8168 Codec Engine enable logging.
Hi Theo,I'm surprised that removing LoggingSetup, LoggerCircBuf, and ServiceMgr from the .cfg file would cause your program to not build. Is it possible for you to step through Codec Engine code (eg,...
View ArticleForum Post: RE: Error Using LoggingSetup for TI-RTOS in CCS 6
Thanks. You can post it to the TI-RTOS forum and I will look out for it.Best regards, Janet
View ArticleForum Post: RE: IPC_start fails with Nameserver issue
So, this is what I did at a high level Build the linux kernel with the following tag: K2_LINUX_03.10.10_RIO_14.04Add the uio stuff to the device table (but I think that is not really needed) and...
View ArticleForum Post: RE: Running TI-RTOS on IAR Embedded Workbench (6.10.3)
I opened a Window command console and typed:set XDCTOOLS_JAVA_HOME==C:\ti\ccsv5\eclipse\jreIf you don't have a CCS installation, you probably have a JRE installed under "C:\Program Files\Java" or...
View ArticleForum Post: am3359 mcasp speed
I am working on am3359 and sys/bios,the manual says the function clock of mcasp is about 25Mhz.but when i configure my mcasp with fifo mode and use edma to sevice transfer and receive.when the CLKR or...
View Article