Forum Post: RE: Linux/PROCESSOR-SDK-AM57X: UDP Throughput Queries
Hi Yordan, OK, I understood no CPU load data are available. But we should know number of CPU cores used for AM572x at least. Thanks and regards, KoT
View ArticleForum Post: Linux/AM3359: GPIO0_20 always low when configured to be input
Part Number: AM3359 Tool/software: Linux Hi, I am using beaglebone black with kernel 4.1.12-ti-r29. i configure gpio 20(gpio0_20) to be input but the value is always 0. i configured it from the user...
View ArticleForum Post: RE: Linux/AM3352: Kernel Oops (AM3352, kernel 3.14.26 – SDK Linux...
Hi Ilya, [quote]Could you please advise why you think the issue is related to the Ethernet configuration in DTS?[/quote] As you can see from the log, kernel crashes at virtual address 79c38812 at the...
View ArticleForum Post: RE: Linux/AM3359: GPIO0_20 always low when configured to be input
Hi Oren, What are you connecting to this gpio? Do you drive it from an external device? Best Regards, Yordan
View ArticleForum Post: Linux/AM5728: gStreamer error
Part Number: AM5728 Tool/software: Linux Hello, we have the following gstreamer pipeline. Sometimes it runs and sometimes it aborts immediately. In the dmesg log below, you can see the error " [...
View ArticleForum Post: RE: Linux/TMDSEVM572X: How to Restart Linux on the 572x EVM after...
Hi Jeff, It is possible to do short connect 1,2 on power button but it is not a good solution because it is not safety for the file system and could cause a crash. Could you use the solution described...
View ArticleForum Post: RE: Linux/AM3359: GPIO0_20 always low when configured to be input
Now its not connected to anything. i will connect button but first i need it to be with high value. Thanks
View ArticleForum Post: RE: Linux/AM5728: gStreamer error
Hello, Do you observe this problem with the latest PSDK? The pipeline seems fine. Could you try gst-launch-1.0 v4l2src device=/dev/video1 io-mode=2 !... You could check this thread also:...
View ArticleForum Post: RE: Linux/WILINK8-WIFI-NLCP: WL18xx WILINK8-WIFI-NLCP
Hi Hamada, Could you give more details about your hardware platform? What is the cpu of the board where is connected Wilink8 and what release you are using? BR Tsvetolin Shulev
View ArticleForum Post: RE: Linux/DRA726: Early boot - late attach on DRA726
Hi Michel, To satisfy the startup time requirements of specific use cases, one may need the boot loader to boot a remote core before booting the A15 with the linux kernel. The kernel then attaches to...
View ArticleForum Post: RE: Linux/AM5728: gStreamer error
Hi Margarita, we didn't test latest sdk yet. Additional info -> We use nfs filesystem. io-mode=2 also produces errors and gives the following output. root@am57xx-evm:~# gst-launch-1.0 v4l2src...
View ArticleForum Post: RE: Linux/AM3359: GPIO0_20 always low when configured to be input
Yordan, I appreciate if you can help me....i am stuck with it for two days... Thanks
View ArticleForum Post: RE: Linux/AM3359: GPIO0_20 always low when configured to be input
Hi, This depends on which device ball are you using to mux gpio0_20. You should have a look at its reset release state from the Data Manaul. You can configure this device pad to have its internal...
View ArticleForum Post: RE: Linux: ti-processor-sdk-linux-am437x-evm-04.00.00.04 kernel...
OK, can you elaborate on what this app is doing? Also provide a full bootlog (dmesg). Best Regards, Yordan
View ArticleForum Post: Linux: How to install " arm-none-linux-gnueabi-gcc" on Linux Host...
Tool/software: Linux Hi There, I am trying to install and run Syslink 2.21.01.05 version on Linux host machine. I was able to run "make syslink" but when I did "make exapmes" Got the following error::...
View ArticleForum Post: RE: Linux: How to install " arm-none-linux-gnueabi-gcc" on Linux...
And one more thing, it might be useful to know what compiler should be used to build examples for the OMAPL138-ARM Linux platform? Is it : arm-none-linux-gnueabi or arm-arago-linux-gnueabi compiler ?...
View ArticleForum Post: RE: Linux: How to install " arm-none-linux-gnueabi-gcc" on Linux...
Hi, First of all which SDK are you using? In the latest SDK 04.00.00.04 you need to export the following: export...
View ArticleForum Post: RE: Linux: How to install " arm-none-linux-gnueabi-gcc" on Linux...
Hi, The SDK is mcsdk 1.01.00.02
View ArticleForum Post: RE: Linux: How to install " arm-none-linux-gnueabi-gcc" on Linux...
This is the version of the GCC arm-arago-linux-gnueabi-gcc --version arm-arago-linux-gnueabi-gcc (GCC) 4.5.3 20110311 (prerelease) Copyright (C) 2010 Free Software Foundation, Inc. This is free...
View ArticleForum Post: RE: Linux/DRA722: j6 eco
Hi, Sorry, I just realized that you're trying to integrate TDA2x Vision SDK on DRA722 GLSDK. This is most likely a compatibility issue between the user space libraries & kernel space drivers......
View Article