Hello James and Lali, Thanks for taking the time to try helping me out. I've finally found the issue with our design. We hadn't been able to mount the eMMC on Linux, and it would only appear under /dev if we lowered the speed below 10MHz. We identified that this was due to a signal integrity issue. We finally tracked this bug down to a HW design issue (not all lines had been pulled up properly - we thought they were). Anyways, after fixing the HW issue, my eMMC tests now run (under Starterware with the current "fixed" mmcsdlib files), and we can mount it under Linux at 52MHz. I did manage to run some tests from the RTOS SDK using CCS as well. All seems to be working properly. Thanks again! Cheers! Carlos
↧